Capture · Record · Stream · Encode · DecodeCapture · Record · Stream · Encode · DecodeYes: the Ultra Stream HDMI and Ultra Stream SDI record and stream at the same time. Each can record to three places at once: its 32 GB of internal storage, a connected USB flash drive and a paired mobile device. While it records, it can also stream live to up to two destinations. Everything comes from the same source signal, so you keep a copy of the event even if the internet connection drops part-way through.
You can start and stop recording and streaming in three ways: with the buttons on the device, in the Ultra Stream smartphone app or in the Web UI in a browser. Set up at least one streaming destination before you go live. Facebook, Twitch and YouTube are supported directly, and any other RTMP or RTMPS server can be added by its address.
The main stream encodes up to 1920x1080 at 60 frames per second in H.264 or H.265, at up to 8 Mbps. The Ultra Stream can send to two RTMP servers at once, but at the maximum 8 Mbps only one RTMP or RTSP stream can be sent. If you want two destinations, choose a lower bitrate. Recordings are saved as MP4 or MOV files.
RTMPS, which is RTMP over an encrypted TLS connection, is supported alongside RTMP and RTSP. The Ultra Stream does not support SRT; for SRT or NDI, look at the Ultra Encode range.
Use the power adapter supplied with the unit. The Ultra Stream needs DC 5 V at 2 A and draws up to about 9.6 W (HDMI model), which is more than many computer USB ports provide.
No marketing noise. Just new product launches, firmware updates, and the occasional guide.
No spam. Unsubscribe any time. Your email is never shared.
Yes. The Ultra Stream can stream to up to two destinations over RTMP, RTMPS or RTSP while it records to its 32 GB internal storage, a USB flash drive or a paired mobile device.
The Ultra Stream supports Facebook, Twitch and YouTube directly, and streams to any other server that accepts RTMP or RTMPS. It also supports RTSP. It does not support SRT; for that, choose an Ultra Encode.
Connect your video source (HDMI or SDI, depending on the model), the power adapter and the network, by Ethernet cable or Wi-Fi. Set the device up from the Ultra Stream smartphone app, or open the Web UI by entering the device’s IP address in a browser on the same network.
The Ultra Stream is the simpler unit. It streams up to 1080p60 over RTMP, RTMPS or RTSP to one or two destinations, records at the same time and can be run from its buttons or a phone app. The Ultra Encode HDMI adds SRT, NDI HX2, HLS and MPEG-TS, up to six RTMP, SRT or MPEG-TS sessions, bitrates up to 16 Mbps and overlays. The Ultra Encode HDMI Plus also encodes 4K at up to 30 frames per second and records to 128 GB of internal storage. Both ranges encode H.264 and H.265.
Yes. The Ultra Stream streams and records at the same time. Recordings go to the 32 GB internal storage, a USB flash drive or a paired mobile device, as MP4 or MOV files.
Use the buttons on the unit to start and stop recording and streaming. You can also control and configure it from a web browser on the same network by going to the device’s IP address, or manage it centrally with Magewell Control Hub.
Yes. As well as Facebook, Twitch and YouTube, the Ultra Stream streams to any RTMP or RTMPS server address you enter.
Enjoying your visit? Quick rating of your browsing experience so far:
Anything specific? (optional)
