Pro Convert IP to AIO 4K— Signal Flow
🌐
NDI / SRT / IP
NDI HB · HX2 · HX3
SRT · MPEG-TS · RTMP
RTSP · HLS · ZIXI
→
🌐
Ethernet
PoE+ powered
→
Pro Convert IP to AIO 4K
Pro Convert IP to AIO 4K
→
📺
4K HDMI + 12G-SDI
HDMI 2.0 — 4K@60fps
12G-SDI — 4K@60fps
Both outputs simultaneously
Single View · PiP · Quad Multiview modes
Home › Products › Pro Convert › Pro Convert IP to AIO 4K
← Back to Pro Convert Decoders
Magewell Pro Convert IP to AIO 4K — side angleIn Stock
Pro Convert IP to AIO 4K — side angle showing portsPro Convert IP to AIO 4K — top anglePro Convert IP to AIO 4K — rear panel: HDMI OUT, SDI OUT, USB, ETH/PoEPro Convert IP to AIO 4K — front panel: PWR, SIG, PGM, PVW indicators
Pro Convert DecodersIn Stock

Pro Convert IP to AIO 4K

SKU: 644000000

Up to 4x NDI streams to a QHD multiview HDMI output.

  • ✓Up to 4x NDI/SRT/RTMP streams input
  • ✓QHD HDMI multiview output (2560x1440)
  • ✓Configurable multiview layouts
  • ✓PoE powered or DC
  • ✓Web UI / Control Hub managed
  • ✓2-3 year warranty (model dependent)
4xNDIQHD HDMIMultiviewPoE
Request a Quote

Ask us a quick question about this product — signal compatibility, use case fit, or anything technical. We usually reply the same day.

About your shortlist Click Add to Shortlist on any products you'd like further information about. When you've finished browsing, head to our Contact form — your shortlist is automatically attached to the message so we can get back to you with whatever you need.
Not sure which products fit? Try the Compare Models or Find My Product tool, or just send us a note and we'll guide you.

About this product

The Magewell Pro Convert IP to AIO 4K is a compact standalone decoder that converts up to four simultaneous IP streams into a single 4Kp60 HDMI output and a 4Kp60 12G-SDI output. It bridges IP-based media networks with traditional baseband equipment, supporting NDI High Bandwidth, NDI HX/HX2/HX3, SRT, MPEG-TS over RTP/UDP/RIST, RTMP, RTSP, HLS, HTTP and ZIXI.

Three output modes cover every monitoring and distribution need. Single View decodes one stream at up to 4K60 with H.264, H.265, SpeedHQ and MPEG2. Picture-in-Picture decodes two streams at up to 1080p60. Quad View shows four streams simultaneously at up to 1080p60 using H.264 or H.265. HDR PQ and HLG are supported on both HDMI and SDI outputs.

Powered by PoE+ (IEEE 802.3at) over the network cable — no separate PSU needed on a PoE+ switch. The browser-based Web UI gives real-time output preview, PTZ control and full configuration. Integrates with Magewell Control Hub and Zixi ZEN Master for centralised management.

Further Reading

Frequently Asked Questions

A compact standalone decoder that converts up to four IP streams into one 4Kp60 HDMI and one 4Kp60 12G-SDI output simultaneously, with Multiview layouts for monitoring multiple sources on a single display.

It adds a 12G-SDI output alongside HDMI, supports 4Kp60 output (vs 1080p), and can decode up to four simultaneous streams in Quad View. It is the broadcast-grade variant designed for production environments needing both HDMI and SDI.

Up to four in Quad View (1080p60), two in PiP mode (1080p60), or one in Single View at up to 4K60.

No. It is PoE+ powered (IEEE 802.3at) over the Ethernet cable. A USB-C 12V 20W power option is also available using the included power adapter.

NDI High Bandwidth, NDI HX/HX2/HX3 (NDI 6.3), SRT, MPEG-TS over RTP/UDP/RIST, RTMP, RTSP, HLS, HTTP and ZIXI. Audio: AAC, MP3, AC3, Opus, G.711.

Via the browser-based Web UI from any device on the same network. It also integrates with Magewell Control Hub and Zixi ZEN Master. An HTTP API is available for custom integrations.