
In Stock


Decode NDI, SRT, or RTMP streams to HDMI output — standalone hardware decoder.
Ask us a quick question about this product — signal compatibility, use case fit, or anything technical. We usually reply the same day.
The Pro Convert for NDI to HDMI is the workhorse decoder in the Pro Convert range. It receives NDI, NDI|HX, SRT, RTMP, or HTTP streams from the network and outputs them as HDMI video for monitors, displays, projectors and downstream HDMI equipment. No PC required.
The most common deployment we see is in production galleries and control rooms that need to monitor specific NDI sources on dedicated screens. One decoder per monitor turns each NDI stream into a permanent physical feed. Houses of worship use it to send the NDI programme output to lobby and overflow displays. Corporate AV uses it to route NDI sources to displays in meeting rooms across a campus.
PoE-powered, so one cable carries both power and the stream from the network to the display position. Web UI for configuration, Magewell Control Hub for centralised management of multiple decoders.
| SKU | 641000000 |
| Brand | Magewell |
| Category | Pro Convert Decoders |
| Network Input | IP network (Gigabit Ethernet) |
| Video Output | 1× HDMI type A (HDMI 1.4) — max output: 1920×1080p60 |
| Audio Output | HDMI embedded (up to 8-ch) — 3.5mm analogue line out |
| Decoding | H.264 / H.265 / SpeedHQ / MPEG-2 — up to 2Kp60 streams |
| Supported Protocols | NDI® High Bandwidth, NDI HX, NDI HX2, NDI HX3 — SRT — RTMP — RTSP — HLS — HTTP — MPEG-TS over UDP/RTP/RIST |
| Video Processing | De-interlacing — Up/down scaling — Frame rate conversion — Aspect ratio conversion — Colour space conversion (BT.601/709/2020) |
| Network & Power | 1× RJ45 Gigabit Ethernet — PoE+ (IEEE 802.3at) powered — Optional USB-C 12V DC |
| Management | Web UI — Magewell Control Hub — REST API — PTZ control (VISCA, PELCO-D/P via NDI) |
| Power | PoE+ (IEEE 802.3at) — Max 12.95W |
| Dimensions | 85mm × 75mm × 26mm — 110g |
| Working Environment | Operating: 0°C to 40°C — Humidity: 20–90% non-condensing |
| UK Stock | In Stock |
| Warranty | 2–3 Years (Magewell manufacturer warranty) |
Full specifications: magewell.com/tech-specs/pro-convert-for-ndi-to-HDMI ↗
Everything included in the box with the Pro Convert for NDI to HDMI. Part numbers and accessory images from official Magewell documentation.




If anything is missing from your delivery, contact us within 7 days and we will arrange a replacement.
Official Magewell documentation for the Pro Convert for NDI to HDMI. Datasheet is mirrored on our server for direct download; drivers, firmware and software live on Magewell's download centre and open in a new tab.
Browse the full Magewell literature library for all product catalogues and datasheets.
No marketing noise. Just new product launches, firmware updates, and the occasional guide.
No spam. Unsubscribe any time. Your email is never shared.
The Pro Convert for NDI to HDMI receives network video (NDI, NDI|HX, SRT, RTMP, HTTP) and outputs it as 1x HDMI (up to 1080p60), allowing you to display IP video on any standard 1x HDMI (up to 1080p60) display or feed it into SDI-based equipment.
No. The Pro Convert for NDI to HDMI is managed via Web UI / Control Hub from any browser. No software installation is needed on the display or destination device.
The Pro Convert for NDI to HDMI is designed to receive and decode a single stream at a time, outputting it to 1x HDMI (up to 1080p60). Contact us if you need multi-stream decoding or multiviewer capability.
Yes — the Pro Convert for NDI to HDMI is fully compatible with NDI sources, including those from NewTek, vMix, OBS NDI plugin, and any other NDI-compatible encoder or software.
The Pro Convert for NDI to HDMI uses PoE 802.3af or DC. This is included in the box.