Ultra Encode AIO
Standalone HDMI and SDI hardware encoder — both inputs, one device, no PC.
- ✓HDMI 2.0 input: up to 3840x2160 @ 60fps
- ✓3G-SDI input: up to 1080p60
- ✓Both inputs active simultaneously with independent encoding
- ✓RTMP, RTMPS, RTSP, SRT, NDI|HX, HLS streaming protocols
- ✓H.264 and HEVC hardware encoding
- ✓Web UI management — no PC required
About this product
The Ultra Encode AIO combines HDMI and SDI inputs in one standalone encoder. Both inputs run independently and can encode separate streams simultaneously — a 4K60 HDMI source going to YouTube while a 1080p60 SDI source goes to an NDI|HX network, for instance.
For mixed-signal venues this saves space, cabling and management overhead. Conference centres with SDI cameras and HDMI presentation feeds get both encoded simultaneously by one device. Houses of worship with mixed-vintage equipment cover both signal types from one box. Broadcast facilities streaming both an SDI programme output and an HDMI graphics feed do so without two separate encoders.
Web UI management, dual-protocol streaming (RTMP, RTSP, SRT, NDI|HX, HLS), H.264 and HEVC hardware encoding. Single power, single network port, two completely independent encoded feeds.
Related Products
New products and Magewell updates
No marketing noise. Just new product launches, firmware updates, and the occasional guide.
No spam. Unsubscribe any time. Your email is never shared.
Further Reading
Frequently Asked Questions
No. The Ultra Encode AIO is a standalone hardware encoder — it requires no PC or host software. It connects to your network and is managed via Web UI / REST API. Simply connect your video source, configure the stream destination once, and it operates independently.
The Ultra Encode AIO supports RTMP, RTMPS, RTSP, SRT, NDI|HX, HLS. It can stream simultaneously to multiple destinations.
The Ultra Encode AIO encodes using H.264 + HEVC hardware hardware encoding, delivering low-latency output without putting load on a host CPU.
See the specification table above for input details.
The Ultra Encode AIO is configured via Web UI / REST API. Access the web interface by entering the device's IP address in any browser on the same network. No software installation is required.
Yes — the Ultra Encode AIO supports NDI|HX output, allowing it to send video over your network to NDI-compatible receivers.