Ultra Encode HDMI
Standalone HDMI hardware encoder — stream without a PC.
- ✓HDMI input with HDMI loop-through output
- ✓Streams to RTMP, RTMPS, RTSP, SRT, NDI|HX simultaneously
- ✓H.264 and HEVC hardware encoding
- ✓Web UI management — no PC required
- ✓Permanent-installation rated
About this product
The Ultra Encode HDMI is a standalone hardware streaming encoder for HDMI sources. Connect a camera, switcher output or any HDMI signal, configure destinations through the web UI once, and the device streams continuously to RTMP, RTMPS, RTSP, SRT or NDI|HX without any host PC involved.
For permanent venue installations this is the right answer where a streaming PC is impractical — permanent church streaming setups that need to "just work" every Sunday, conference room webcasting installations, classroom recording rigs, sports venue camera positions. Configure once, leave running.
The HDMI loop-through keeps a downstream monitor connected for confidence viewing, and the device can stream to multiple platforms simultaneously — YouTube Live, Facebook Live, custom RTMP, and an NDI|HX feed for in-network production, all running at the same time.
Compatible Software
Related Products
New products and Magewell updates
No marketing noise. Just new product launches, firmware updates, and the occasional guide.
No spam. Unsubscribe any time. Your email is never shared.
Further Reading
Frequently Asked Questions
No. The Ultra Encode HDMI is a standalone hardware encoder — it requires no PC or host software. It connects to your network and is managed via Web UI / REST API. Simply connect your video source, configure the stream destination once, and it operates independently.
The Ultra Encode HDMI supports RTMP, RTMPS, RTSP, SRT, NDI|HX. It can stream simultaneously to multiple destinations.
The Ultra Encode HDMI encodes using H.264 + HEVC hardware hardware encoding, delivering low-latency output without putting load on a host CPU.
The Ultra Encode HDMI accepts 1x HDMI (up to 4Kp30 or 1080p60).
The Ultra Encode HDMI is configured via Web UI / REST API. Access the web interface by entering the device's IP address in any browser on the same network. No software installation is required.
Yes — the Ultra Encode HDMI supports NDI|HX output, allowing it to send video over your network to NDI-compatible receivers.