Ultra Encode SDI Plus
Standalone SDI encoder with professional XLR audio I/O.
- ✓3G-SDI input with active loop-through
- ✓XLR line input and output (balanced)
- ✓RTMP, RTMPS, RTSP, SRT, NDI|HX
- ✓H.264 + HEVC hardware encoding
- ✓No PC required
- ✓Backward compatible with HD/SD-SDI
About this product
The Ultra Encode SDI Plus is the Ultra Encode SDI plus professional XLR audio I/O. For broadcast facilities and live-production venues with balanced XLR audio infrastructure, this combines SDI-to-IP encoding with proper audio integration in one box.
The SDI signal carries embedded audio (up to 16 channels) but in many facilities the production mix happens externally on a dedicated audio console — not in the SDI embedder. The XLR inputs let that external mix feed directly into the encoded stream, replacing the SDI-embedded audio if needed. XLR output lets the encoder feed audio back to monitoring infrastructure.
Common in broadcast facilities where audio and video chains are managed separately, in sports productions where commentary audio is mixed at the OB position rather than embedded into camera SDI, and in live-event productions with dedicated FOH consoles.
Related Products
New products and Magewell updates
No marketing noise. Just new product launches, firmware updates, and the occasional guide.
No spam. Unsubscribe any time. Your email is never shared.
Bridge SDI to IP — Keep Your SDI. Unlock IP Workflows.
Further Reading
Frequently Asked Questions
No. The Ultra Encode SDI Plus is a standalone hardware encoder — it requires no PC or host software. It connects to your network and is managed via Web UI / REST API. Simply connect your video source, configure the stream destination once, and it operates independently.
The Ultra Encode SDI Plus supports RTMP, RTMPS, RTSP, SRT, NDI|HX. It can stream simultaneously to multiple destinations.
The Ultra Encode SDI Plus encodes using H.264 and HEVC hardware encoding, delivering low-latency output without putting load on a host CPU.
The Ultra Encode SDI Plus accepts 1x 3G/HD/SD-SDI with loop-through.
The Ultra Encode SDI Plus is configured via Web UI / REST API. Access the web interface by entering the device's IP address in any browser on the same network. No software installation is required.
Yes — the Ultra Encode SDI Plus supports NDI|HX output, allowing it to send video over your network to NDI-compatible receivers.