
In Stock


Show an NDI or IP stream on any HDMI screen or projector in the building, with the decoder in the rack and a 4K display filled by scaling.
Plays from YouTube when you press play. All our videos · Setup & guides playlist
Magewell Modator 2U
Up to ten encoder, decoder and streaming modules in any mix, in one 2U rack chassis that powers and monitors them all.
Watch on YouTubeMagewell Modator 2U: Build a Complete Venue System, Job by Job
One 2U rack running a whole venue, built one job at a time with every cable shown on the real module faceplates: sources onto the network, pictures to every screen, a live stream with recording and a four-way control-room multiview. Then hot-swap, 24/7 running, the four ways to control it and what you need.
Watch on YouTubeOnce video is on the network, somebody still has to get it onto the screens: the monitors in a gallery, the televisions in a foyer, the projector in a hall. For AV teams with HD sources and a lot of displays, the Pro Convert for NDI to HDMI Module is the NDI decoder that does it from the equipment room. It takes one video stream from the network and turns it into an HDMI signal for a monitor, television, projector or video wall processor. It is a slide-in module for the Magewell Modator 2U chassis, so a rack of them can feed every screen in a building from one place.
The module decodes streams of up to 2Kp60, which in practice means sources up to about 1080p at 60 frames per second. Its HDMI socket can output up to 4096×2160 at 60 frames per second. So a 1080p stream can be scaled up to fill a 4K screen, and you can use whatever display is already on the wall. Scaling fits the picture to the display, with the detail of the original stream. For 4K sources, choose the Pro Convert for NDI to HDMI 4K Module, which decodes up to 4Kp60.
The same specification is also available in a standalone form. If one or two channels are all you need, see the standalone Pro Convert for NDI to HDMI. The other modules are listed on the Modator range page.
| SKU | B41010000 |
| Brand | Magewell |
| Category | Modator |
| Form Factor | Hot-swappable module for the Magewell Modator 2U chassis (chassis required) |
| Function | Decodes one IP stream to HDMI |
| Decoding | Up to 2Kp60 — NDI High Bandwidth — NDI HX / HX2 / HX3 — RTSP — HTTP — HLS — RTMP Pull / Push — MPEG-TS over UDP / SRT / RTP — TVU — H.264 / H.265 — NDI 6.3 |
| HDMI Output | 1× HDMI 2.0 — max. 4096×2160 60 fps 4:4:4 8-bit — 8-channel 48 kHz audio |
| Picture Controls | Image flip — safe area |
| Network | 1× RJ45 1000 Mbps Ethernet |
| Other Ports | 1× USB Type-C (configuration) — 1× USB Type-A 3.0 (peripherals) — 1× Modator interface (hot-swappable) |
| Management | Modator chassis touch screen — Web GUI — Magewell Control Hub — HTTP-based APIs |
| Power | From the Modator chassis — max. 4.3 W |
| Dimensions | 184.4 mm × 30.0 mm × 81.5 mm |
| Weight | Approx. 290 g |
| Working Environment | Operating: 0°C to 50°C — Storage: −20°C to 70°C — Humidity: 5–90% non-condensing |
| UK Stock | In Stock |
| Warranty | 2 Years (Magewell manufacturer warranty) |
Everything included with the Pro Convert for NDI to HDMI Module.

If anything is missing from your delivery, contact us within 7 days and we will arrange a replacement.
Official Magewell documentation for the Pro Convert for NDI to HDMI Module. Datasheet is mirrored on our server for direct download; drivers, firmware and software live on Magewell's download centre and open in a new tab.
Browse the full Magewell literature library for all product catalogues and datasheets.
It decodes streams of up to 2Kp60. The HDMI output can run at up to 4096×2160 at 60 frames per second, so a lower-resolution stream can be scaled up to fit a 4K display.
Choose the Pro Convert for NDI to HDMI 4K Module, which decodes up to 4Kp60. This module decodes up to 2Kp60 and scales the picture to suit the display.
NDI High Bandwidth, NDI HX, NDI HX2 and NDI HX3, and H.264 or H.265 streams over RTSP, HTTP, HLS, RTMP pull or push, MPEG-TS over UDP, SRT or RTP, and TVU. One module handles NDI on your own network and streams coming in from outside.
One HDMI output. For HDMI and SDI together, choose the Pro Convert for NDI to AIO Module.
A slot in the Modator 2U chassis, which supplies its power. For a freestanding unit of the same specification, see the standalone Pro Convert for NDI to HDMI.
The Pro Convert for NDI to HDMI Module. The chassis powers it, so it is ready to slide in; add your own HDMI and network cables.
From the touch screen of the Modator chassis, from the Web GUI in a browser with nothing to install, or through Magewell Control Hub. HTTP-based APIs are available for custom integration.
No marketing noise. Just new product launches, firmware updates, and the occasional guide.
No spam. Unsubscribe any time. Your email is never shared.
Enjoying your visit? Quick rating of your browsing experience so far:
Anything specific? (optional)